82 series water-based plastic ink

82 series water-based plastic ink

Ink characteristics

After adding a special curing agent, it has high hardness, gloss, fullness, scratch resistance, abrasion resistance, water resistance, alcohol resistance, acetone wipe resistance, and chemical resistance. Has a very good price/performance ratio.

1. Low VOC, slight toxicity and environmental protection.

2. Directly dilute with non-polluting tap water or deionized water (when halogen is required).

3. Excellent adhesion to plastic substrates.

4. It has good drying properties under dry conditions.

5. It has a relatively long construction time limit.

6. The coating film has good hardness, flexibility and impact resistance.

7. Comply with ROHS standards.

Other parameters

Appearance: light yellow transparent liquid

Viscosity: 10000-12000PCS (25℃)

Active ingredients: 45% ±2

Solvent: ether esters, amine neutralizer

PH value 8 ± 0.5

Drying conditions: Bake at 180°C for 8-10 minutes

VOC Value: 18±2

Add water-based curing agent ratio: 100:20

Thinner

Directly dilute with non-polluting tap water or deionized water (when halogen is required).

Emergency measures

1. This product is an industrial-grade product. Avoid direct contact with skin, eyes and inhalation.

2. Use this product under forced ventilation conditions.

3. If this product is accidentally splashed into the mouth, nose, eyes, and ears, use a lot of water to clean it or ask a doctor directly.

4. Those who are allergic to this product should apply a layer of skincare cream or wear impermeable gloves before use.

Precautions 

1. It should be stored indoors at a temperature of 4-40°C and avoid direct sunlight.

2. Strictly prevent freezing and exposure during transportation and storage, and avoid excessively low and high-temperature environments.

3. Plastic drum for packaging: 1KG or 4KG plastic tank.